Connection Problems (again)

Chat about anything. Non-TS related.

Moderator: Forum Moderators

Post Reply
Jurgen-NL
Community User Level: 4
Community User Level: 4
Posts: 719
Joined: Fri May 22, 2009 2:18 am

Connection Problems (again)

Post by Jurgen-NL » Wed Feb 24, 2010 1:26 pm

i got some serious connection problems which i thought i had solved last week by removing the splitter,

i am getting disconnects here every +/- 4-5 min and it has been good for a week till today my mum pulled some plugs and put some back in sigh.
so now its the same as it was before when the splitter was the problem.

but now even without the splitter its causing the same problem i was hoping someone can help me fix this in the week i made it work it was absolutly a good connection now its less then a crappy connection.

here are some details

Router: Wag200g Linksys (this is when the connection works fine)

DSL Status: Connected
DSL Modulation Mode: MultiMode
DSL Path Mode: Fast
Downstream Rate: 5088 kbps
Upstream Rate: 1024 kbps
Downstream Margin: 6 db (changes from 6-7 when disconnecting it is 274148758458)
Upstream Margin: 7 db
Downstream Line Attenuation: 45 db
Upstream Line Attenuation: 12.5 db
Downstream Transmit Power: 11 db
Upstream Transmit Power: 19 db


--------------------------------------------------------------------------------

PVC Connection
Encapsulation: RFC 2364 PPPoA
Multiplexing: VC
Qos: UBR
Pcr Rate: 0
Scr Rate: 0
Autodetect: Enable
VPI: 8
VCI: 48
Enable: Yes
PVC Status: Up

i hope someone can do something with this information if not i can give you details you need i guess....
Dont beg for things do it yourself or else you wont get anything!!

Jurgen-NL
Community User Level: 4
Community User Level: 4
Posts: 719
Joined: Fri May 22, 2009 2:18 am

Post by Jurgen-NL » Fri Feb 26, 2010 12:08 pm

i did a firmware upgrade on the routers version which might take care of the problem but that is not the case,

the strange thing is suddenly my modulation mode changed from multi mode to g.dmt??

i still experience the same problems as before.

DSL Status: Connected
DSL Modulation Mode: G.dmt
DSL Path Mode: Fast
Downstream Rate: 5184 kbps
Upstream Rate: 1024 kbps
Downstream Margin: 6 db
Upstream Margin: 6 db
Downstream Line Attenuation: 46 db
Upstream Line Attenuation: 13 db
Downstream Transmit Power: 11 db
Upstream Transmit Power: 5 db


--------------------------------------------------------------------------------

PVC Connection
Encapsulation: RFC 2364 PPPoA
Multiplexing: VC
Qos: UBR
Pcr Rate: 0
Scr Rate: 0
Autodetect: Enable
VPI: 8
VCI: 48
Enable: Yes
PVC Status: Up
Dont beg for things do it yourself or else you wont get anything!!

Post Reply